RORO Cargo Ships And Vehicle Carriers That Were Converted Into ROPAXes In The Philippines

RORO (Roll-on, Roll-off) Cargo Ships differ from ROPAXes (RORO-Passenger Ships) in that the former are mainly for carrying rolling cargo (vehicles mainly but could also be heavy equipment) with their drivers and crew and as such their passenger capacity and amenities like a restaurant or cafeteria are small. They are mainly designed to ferry vehicles across the sea with the least loading and unloading time. Their sizes vary depending on the distance and the traffic volume. Generally, they have higher sides.

In the Philippines, they are represented currently by the Super Shuttle RORO 7, Super Shuttle RORO 8, Super Shuttle RORO 9, Super Shuttle RORO 10, Super Shuttle RORO 11 and the Super Shuttle RORO 12 of the Asian Marine Transport Corporation (AMTC). They are also represented by the Dapitan Bay 1, Panglao Bay 1 and Batangas Bay 1 of Carlos A. Gothong Lines Inc. (CAGLI). But this selection is the relatively large ones by RORO Cargo Ship standard. There were smaller versions of it in the past.

Vehicle Carriers are similar to RORO Cargo Ships but instead of acting like commuters they deliver vehicles from the factories to a destination and so they will come back without load unlike the RORO Cargo Ships.  Vehicle Carriers could be smaller or bigger than RORO Cargo Ships but lately they began growing bigger to be more efficient in bringing new cars from the likes of Japan to the United States. Those delivering cars within Japan only were considerably smaller.

In the Philippines, there were several RORO Cargo Ships and Vehicle Carriers that were converted into ROPAXes or what is commonly called as ROROs here and most became RORO Liners of the major liner companies. Per ton, a RORO Cargo Ship or a Vehicle Carrier is cheaper than a ROPAX as it doesn’t have that much equipment and amenities for passengers. Besides, for the same size, they could have smaller engine/engines and so the speed is a bit less.

In refitting, it is possible that in a RORO Cargo Ship or a Vehicle Carrier that metal has to chopped off. Meanwhile, locally, it is normal to add metal to a ROPAX from Japan to add decks for more passenger accommodation. Viewing areas were not considered in the building of RORO Cargo Ships and Vehicle Carriers and that could be one reason for chopping off metal.

I noticed that RORO Cargo or Vehicle Carrier conversion here goes by streaks by shipping lines that has a liking for them for the benefits they offer like a smaller capital cost for the same capacity and I agree with them it is a route worth taking. Maybe the first who took this route was the K&T Shipping Lines which was later known as the Maypalad Shipping Lines after their ferry Kalibo Star sank in Samar Sea in the late 1990s.

Samar Star

Many do not know that K&T Shipping was among the first in the acquisition of ROROs and maybe one reason for that is their ROROs do not look like the traditional ROROs of the other shipping lines. Their first RORO was the Samar Queen that was later renamed into Samar Star which actually became their last ship existing but not sailing. This ship was classified as a Ferry-RORO in Japan but she has the looks a cargo ship like a trio of sister ships K&T Shipping later acquired – the Leyte Star (a.k.a. Leyte Queen), the Cebu Star (a.k.a. Cebu Queen) and the Kalibo Star (a.k.a. Ocean Star). The difference is these four ships have rear-quarter ramps and a car deck and in order for them to carry passengers, K&T Shipping built a passenger deck atop the car deck. In Japan, the trio was classified as Vehicle Carriers.

Leyte Star

The Leyte Star by Edison Sy of PSSS.

The Samar Queen was smaller than the three sister ships at 56.6m x 9.0m x 5.6m and she arrived in 1980 which was just the dawn of RORO (more exactly ROPAX) shipping in the Philippines. Meanwhile, the Leyte Queen arrived in 1984 and the Cebu Queen arrived in 1986. Then the ill-fated Kalibo Star arrived in 1992. All of the three were former Toyo Maru ships in Japan but they have different owners. The external measurement of the Kalibo Star was 72.0m x 10.4m x 4.5m and the measurements of the other two sister ships hew closely to this.

The trio of sister ships were powered by a single 1,250-horsepower Hanshin engine which gave a design speed of 12.5 knots. The Samar Star has a single 1,300 Nippatsu-Fuji engine giving a speed of 13 knots. And this brings up one characteristic of small RORO Cargo ships and Vehicle Carriers. They are generally powered by a single engine only whereas ROPAXes of their size almost invariably have two engines and are faster.

Cebu Star

Cebu Star by Rex Nerves of PSSS.

These four K&T ships have one of the minimum conversions in this type of ships. At the start, the passengers just have to unroll cots and look for a place that they prefer.  Their main cargo here was not rolling cargo either. Nothing unusual in that as most Cebu overnight ferries carry loose and palletized cargo in the main. In loading and unloading, forklifts are used just like in the other Cebu overnight ferries.

Before I digress further, the first of this type of ships converted into ROPAX might be the Don Carlos of Sulpicio Lines Inc. which arrived in 1977 and was classified as a Vehicle Carrier in Japan. Actually, the Don Carlos could very well be our very first ROPAX that is not an LCT. This ship was formerly the Daiten Maru of the Masumoto Kisen KK in Japan. She also not carried rolling cargo except for some trucks and heavy equipment destined for the South (her route is to General Santos City) and on the return trip livestock was loaded. She suffered a piracy attack in 1978 and later she was just used as a cargo ship.

1978 0508 Hijacked Ship

Research by Gorio Belen in the National Library.

The Don Carlos measured 71.6m x 10.9m x 4.9m which is almost the same of the measurements of the K&T Shipping sistership trio. However, this Sulpicio ferry looks like a regular ROPAX after refitting. She was equipped with a single Hanshin engine of 1,300 horsepower and her design speed was 12.5 knots and that speed was her one weakness as she was sailing a long route.

The second shipping company that had a liking for this type of ship to be converted as ROPAXes was the Carlos A. Gothong Lines, Inc. (CAGLI). This happened when they were building up their fleet so that they can return to their Manila route after her break-up with Lorenzo Shipping Corporation. After the break-up Gothong Lines concentrated on the Visayas-Mindanao routes but they relied on small ROPAXes. For the Manila route, they needed bigger ships and acquiring this type I am discussing was their route.

Their first of this type converted to ROPAX might have been the Our Lady of Guadalupe which was Asaka Maru No.8 in Japan and was classified as a Ferry-RORO. But to me she has the built of a Vehicle Carrier which meant metal has to be taken off rather than added like what happens in the former ROPAXes of Japan brought here. One thing notable in the Our Lady of Guadalupe is the high sides with few viewing areas for passengers. The two traits are traits of Vehicle Carriers.

Our Lady of Guadalupe (2)

Our Lady of Guadalupe by Toshihiko Mikami of PSSS.

The Our Lady of Guadalupe measured 89.7m x 14.4m x 4.8m with a passenger capacity of 674 persons. She was powered by two Niigata engines with a total of 5,400 horsepower and her top sustained speed when new was 16 knots. She was fielded in the Manila route in 1986 before being downgraded by Gothong Lines to the Cebu-Surigao route in the early 1990s and she had the reputation of being unreliable and that helped the new Cokaliong Shipping Lines Inc. to survive in the route. Her unreliability was never resolved even when she was passed on to the Cebu Ferries Company after the “Great Merger” of 1996.

In 1990, Gothong Lines acquired a pair of sister ships classified as RORO Cargo ships in Japan. The two are the Shinsei Maru which became the Our Lady of Sacred Heart and the Shinka Maru which became first as the Sto. Nino de Cebu. The latter suffered a fire early on after fielding (how can a ship with such a magical name catch fire?) but she was repaired and she was renamed into the Our Lady of Medjugorje. The two are among the better conversions that I have seen and in the latter I love her verandas and she was among my favorite ships.

OUR LADY of SACRED HEART

Our Lady of Sacred Heart by Chief Ray Smith of PSSS.

The sister ships have already been lengthened in Japan and they measured an identical 123.0m x 18.0m x 12.3 meters and that size was average for many of the liners that came in 1990-92 although their passenger capacity did not reach 2,000 persons. The two were not built in the same shipyard. The Our Lady of Sacred Heart was built by Tsuneishi Shipbuilding in 1978 and the Our Lady of Medjugorje was built by the Mitsui Engineering & Shipbuilding in 1979. The first had a single 9,000 horsepower Mitsui engine while the latter had a single 8,000 horspower engine but both had a design speed of 17 knots which became 16.5 knots in the country. In the “Great Merger” they were transferred to WG&A and they continued to ply a route from Manila and sometimes pairing with each other as they have the same speed (sometimes with SuperFerry 3 too that also has the same speed with them).

Our Lady of Medjugorje (Aboitiz)

Our Lady of Medjugorje by Albritz Salih of PSSS.

A related company, the Cebu Ferries Corporation (CFC) acquired in 2009 and 2010 two ships, the Asakaze and Esan which became the Cebu Ferry 2 and Cebu Ferry 3. In Japan they were classified as Ferry-ROROs but they do not look like the type. They might have a small passenger capacity but both featured open car decks and so plenty of metal has to be added in them to become ROPAXes. I do not consider the two part of the type I am discussing.

When Carlos A. Gothong Lines Inc. divested from WG&A, their first acquisition in 2001 when the divestment was not yet complete was actually a RORO Cargo ship, the Koyo Maru of Keiyo Kisen which became the Butuan Bay 1 in their fleet. At 114.8m x 19.0m x 9.6m, she was not a small ship. What are striking about her was her height and the length of her ramp. The ship was built by Iwagi Zosen in 1989 and she is powered by a single Mitsubishi-MAN engine with 9,600 horsepower that gave her a speed of 17.5 knots.

Butuan Bay 1 in Iligan City

Butuan Bay 1 by Josel Nino Bado of PSSS.

However, her refitting was not first-class (two passenger decks were just added atop her decks) and so when she was sold to Trans-Asia Shipping Lines Inc. (TASLI) in 2010 after an engine room explosion, TASLI remodeled the ship comprehensibly and she became a looker as the Trans-Asia 5. However, when MARINA took exception to her conking out and wallowing in water (the disadvantage of a single-engine design), she was reverted into a cargo ship and parts of her superstructure were removed. Still, she is a good-looking ship.

Trans Asia 5

The old Trans-Asia 5 by Michael Roger Denne of  PSSS.

Trans-Asia 5

The new Trans-Asia 5 by Mike Baylon of PSSS.

Recently, another shipping company took as liking for this type to be converted into ROPAXes. This is the Asian Marine Transport Corporation (AMTC) which also operates many RORO Cargo ships for their cargo liner operations. Their conversions started their Super Shuttle RORO series but it stopped at three as it seems they found out they were not really good in passenger liner operations.

Their first ship converted was the small RORO Cargo ship Cebu Trader which became the Super Shuttle RORO 1. This ship was built in 1978 by Trosvik Verskted in Norway and has passed into many hands already which is normal in Europe especially for this type. She measured 97.2m x 16.6m x 6.4m and she was powered by two Hedemora engines with a low total of 2,600 horsepower but still her design speed was 14.5 knots (which is a little doubtful).

Super Shuttle Roro 1

Super Shuttle RORO 1 by Fr. Bar Fabella, SVD of PSSS.

AMTC acquired this ship in 2011 and she was tastefully and even moderniscally refitted in Ouano port for ASR in Mandaue, Cebu which showed none of her age. However, she did not serve long as in 2012 she caught fire in heavy downpour while taking shelter from a tropical storm in Looc Bay in Tablas Island, Romblon on a route from Batangas to Dumaguit via Odiongan. She was never repaired.

The next in the series actually came in 2010 and was a small Vehicle Carrier. This was the former Koyo Maru No. 23 in Japan which became the Super Shuttle RORO 2 for AMTC after conversion. The ship measures 90.0m x 14.2m x 11.6m and she is powered by a single Hanshin engine of 3,200 horsepower which gave her a top speed of 14.5 knots when was still new.

Super Shuttle Roro 2

Super Shuttle RORO 2 by Raymond Lapus of PSSS.

However, even with an equal design speed it was said she was faster than the Super Shuttle RORO 1 in the same route to Dumaguit port in Aklan. Well, this ship was built later in 1987 by Imamura Shipbuilding in Japan and that could be a difference. Super Shuttle RORO 2 still sails in the same route but sometimes she takes long breaks.

The last ship in the series is the biggest of the three at 128.8m x 19.9m x 6.6m which is already not small for a liner but she was not developed well and her Tourist section was not even finished. This ship was the Vehicle Carrier Atsuta Maru in Japan that was built by Kanda Shipbuilding and she was named as the Super Shuttle RORO 3 in AMTC. Her route is Batangas-Masbate-Mandaue-Cagayan de Oro and with unfavorable arrivals and departures she never became popular with the passengers especially when her departure times became hard to divine as the company gave priority to cargo. However, her cargo load is always good.

Super Shuttle Roro 3

Super Shuttle RORO 3 by Aris Refugio of PSSS.

Recently, she no longer takes in passengers. Before she was a cheap, direct ride to Batangas but the passengers have to bear hardships. I was lucky I was able to ride her when she was still taking passengers. There were times too when she became unreliable and can’t sail for extended periods of time. She has a single 8,000 horsepower Hitachi engine which powers her to 18 knots when still new. Her unreliability seems to stem from maintenance problems.

Roble Shipping Inc. also tried this type of conversion when they acquired the Vehicle Carrier Taelim Iris from South Korea in 2015. They did not immediately do work on the ship and when work commenced it was just done in their wharf in Pier 7 in Mandaue, Cebu. A lot of metal was added but after the work was finished a beautiful Oroquieta Stars emerged which became their pride. Originally meant for Misamis Occidental, she became a regular to Baybay, Leyte where she is a favorite.

Oroquieta Stars

Oroquieta Stars by James Gabriel Verallo of PSSS.

The Oroquieta Stars measures 77.4m x 12.0m x 8.1m and she is equipped with two Akasaka engines with a total of 4,900 horsepower. Her design speed is 16 knots and that is more than enough for a Leyte overnight ship. She was built by Sanyo Shipbuilding in Japan in 1994.

Another company which tried this conversion route was the Aleson Shipping Lines of Zamboanga. They acquired the Ariake Maru No.18 in 2016, a Vehicle Carrier in Japan built by Honda Shipbuilding. This ship has high sides and to have passenger viewing areas and access, metal has to sloughed off. In the Aleson fleet, this ship became known as the Antonia 1 and named after the matriarch of the company.

52315746_2330050103986854_4842633140147060736_n

Antonia 1 by Albritz Salih of PSSS.

The Antonia 1 measures 103.6m x 15.5m x 11.5m and she is powered a single Akasaka-Mitsubishi engine of 4,000 horsepower. Her design speed is 15 knots. Presently, the ship’s route is Zamboanga-Sandakan, our only international passenger ship route.

The last company which tried this route of conversion is the Trans-Asia Shipping Lines Inc. (TASLI). They acquired the Warrior Spirit in 2016 and even earlier than the Antonia 1. While the Antonia 1 sailed in 2017, the Warrior Spirit which was renamed into the third Trans-Asia still can’t sail as a host of ailments that defied easy solutions bugged her especially in the engine department.

39441733_1940977989258472_3367702600030879744_n

Trans-Asia by C/E John Nino Malinao Borgonia of PSSS

The ship was built by Nouvelle Havre in France in 1980. Trans-Asia, the third, measures 126.2m x 21.0m and her design speed is 19 knots. With high sides and being tall, this ship is the biggest-ever of Trans-Asia Shipping Lines. And I hope that finally they will be able to solve her problems.

I am not too sure if my list is complete. But I would want to see in the future what other ships of this type will be converted into ROPAX in our country again.

 

 

 

RORO Cargo Ships and Vehicle Carriers Can Be Good ROPAX Liners

In shipping, wherever that be in the world, fuel consumption is a critical factor because it takes up 40% of the operational costs of the ship. Here it might even be higher as our ships are old and our mariner rates are so low and apprentices comprise about half of the crew and they are the ones that pay and not the shipping company. So when fuel prices went really high a decade ago even the Fast ROPAXes of Europe capable of 30 knots slowed down to save on fuel. High Speed Crafts (HSCs) suffered also, had to slow down too and some stopped sailing for they were simply unprofitable even at very high load factors.

We too had been victims of that fetish with speed that in the 1990’s and so, many liners capable of 20 knots, locally, came into the country. The list of this is long and I would list it: Filipina Princess, Princess of Paradise, Princess of the Stars, Princess of the Universe, Princess of the World, Princess of the Ocean and Princess of New Unity, all of Sulpicio Lines; SuperFerry 1 of Aboitiz Shipping; Mabuhay 1 and Mabuhay 3 of William Lines; Our Lady of Lipa, SuperFerry 12, SuperFerry 14, SuperFerry 15, SuperFerry 16, SuperFerry 17 and SuperFerry 18 of WG&A; SuperFerry 20 and SuperFerry 21 of Aboitiz Transport System; St. Francis of Assisi, St. Joseph The Worker, St. Peter The Apostle, Mary Queen of Peace, St. Ezekiel Moreno, St. Michael The Archangel and St. Francis Xavier of Negros Navigation. SuperFerry 16 then came back to become the St. Therese of the Child Jesus of 2GO. A total of 26 liners. Now isn’t that too many? And most are 150 meters in length or over and the average passenger capacity is over 2,000 with 3 even breaching the 3,000 mark.

I argue that most proved to be oversized.

That speed came from oversized engines, usually 20,000 horsepower and over which means more fuel consumption and I was not happy with that trend in speed and the trend of upsizing the ships because I know that in the past when liners became bigger than the ex-”FS” ship, many ports with previous connection to Manila were left out because the liners were already too big and their drafts too deep for the small and shallow ports. Then later, the fast cruisers became the new paradigm and more ports have to be left out because to shorten voyage duration the interports were reduced. Gone were the old routes which featured four, five or even six ports of call and with voyages lasting several days.

Those big, fast liners might have been okay when ship passengers were still overflowing when there were still no budget planes and intermodal buses as competition. But that was not okay for the passengers left behind in the abandoned ports. It just created a generation or two of passengers not catered to by ships and grew up not relying on them.

And in the end the liner companies paid dearly for that. Even with advertisements they can no longer be coaxed into riding ships (even if they are painted pink). And that became a disaster for liner shipping when passengers thinned. Too few port calls mean less passengers and cargo – when the ships were already big and guzzling fuel and heavily needing those. And that just helped sink the liner sector of our shipping which has not recovered until now.

I argue that for the passenger loads and cargo sizes now our liners sailing are simply too big and that is the reason why they can’t or won’t call in the smaller ports served by liners until the end of the millennium like Ormoc, Surigao, Tagbilaran, Dapitan and others. It should go down in size and maybe add ports of call and damn if transit times are longer. What is more important is that the ships become fuller so that it will be more profitable. Anyway, those who want fast travel will simply take the budget planes. But still there are still many people which prefer the ships to the planes.

Moreover, the remaining liners now have engines too big to be profitable on marginal routes and smaller ports. I think the engines also have to be downsized. If fuel prices go up once more the liners won’t be profitable again.

24470264000_03f9e86eeb_z(1)

Our Lady of Sacred Heart by Chief Ray Smith

In downsizing and saving on fuel, there is one type of ship that is actually fit for us. These are the former RORO Cargo ships and Vehicle Carriers and we have several  examples of that in the past. Actually for the same size and length, RORO Cargo ships have smaller engines than ships which were ROPAXes from the start. They were not really built for speed but for economy while having a decent speed. And moreover on RORO Cargo ships not much steel has to be added as additional decks.

4874776874_88693a7eb1_b

Our Lady of Medjugorje by Nat Pagayonan

In the past when liners were not that yet big and fast we had very successful liners whose origins were as former RORO Cargo Ships. I think the most famous of these were the sister ships Our Lady of Sacred Heart and the Our Lady of Medjugorje of Carlos A. Gothong Lines Incorporated (CAGLI) which both came in 1990. Beautifully renovated, few suspected their true origins. Weighing the amenities of the ship, they were not inferior to liners of their size. And nor in speed although they have engine horsepowers less than the liners of their size.

3738950198_1bc3099a01_z

Butuan Bay 1 by Vinz Sanchez

It was the revived Carlos A. Gothong Lines (when they split from WG&A) which brought in the next batch of RORO Cargo ships for conversion into liner ROPAXes when they acquired the Butuan Bay 1 and the Ozamis Bay 1 in the early 2000’s. But what puzzled me is they forgot how to convert them into beautiful ROPAXes like before and almost everybody that rode them said they were ugly. And that maybe helped doom the return of Gothong Lines into passenger shipping. When Butuan Bay 1 became the Trans-Asia 5 it became a beautiful ship with first-class interiors. Butuan Bay 1 should have been like that from the very start and if it were, the trajectory of Gothong Lines might have been different (of course they had other problems too).

6557196425_bac010cd62_z

Ozamis Bay 1 by Mike Baylon

It was the Asian Marine Transport Corporation or AMTC that next brought RORO Cargo ships here for conversion into RORO liners. In their Super Shuttle RORO series, they started with the first three converted in to ROPAXes and these were the small Super Shuttle RORO 1, Super Shuttle RORO 2 and Super Shuttle RORO 3. However, the conversions were also not done well and were not worthy of the beautiful small liners of the past. Were they scrimping too like the revived Carlos A. Gothong Lines? Or were they thinking more of the cargo than the passenger revenue?

7550514648_09266e314e_z

Super Shuttle RORO 1 by Fr. Bar Fabella

8216319601_782f1d9614_z

Super Shuttle RORO 2 by Nowell Alcancia

18049181780_1072f84fc4_z

Super Shuttle RORO 3 by Mike Baylon

The next batch of Super Shuttle ROROs which were former RORO Cargo ships or variants from the Super Shuttle RORO 7 to Super Shuttle RORO 12 were all big, all former RORO Cargo ships but all were no longer converted in ROPAXes because maybe the first three of AMTC were not particularly successful. I was able to board all of them and their interiors were all good. The cabins for the vehicle drivers were still in good condition and being used along with ships’ drawing rooms and the good, functional galleys. Some even have gyms. Actually what was only needed is to maybe convert the top deck or another deck into good passenger accommodations. Our shipbuilders were good at that in the 1950’s and 1960’s when refrigerated cargo or cargo-passenger ships from Europe were converted into liners for Sulpicio Lines, William Lines and Sweet Lines aside from Compania Maritima.

8261221876_0ffdbdf021_z

Super Shuttle RORO 7 by James Gabriel Verallo

The Super Shuttle RORO 7 and Super Shuttle RORO 8 were the two AMTC ships that were intriguing for me. At 145 and 146 meters length the size is good especially since this is a tall ship with at least 4 RORO decks. The original top sustained speeds are 17 and 17.5 knots from only 6,900 and 7,800 horsepower which is even less than the horsepowers of the Our Lady of Sacred Heart and the Our Lady of Medjugorje which both had top sustained speeds of 17 knots when new and did 16 knots here even with additional metal and age. If 16 knots can be coaxed from the small engines of the two AMTC ships then it might have been enough especially if compared to the speeds the former Cebu Ferries series converted liners are doing now. It will have a good container load with a decent passenger size if one deck is converted into passenger accommodations and the cabins for drivers are used for passengers here. I was hoping AMTC will go in that direction but they did not. It turned out AMTC was no longer interested in liner shipping and was more interested in container shipping and especially the loading of brand-new vehicles destined for car dealers in the south.

8134163772_3ef99c5724_z

Super Shuttle RORO 8 by Aris Refugio

A design speed or original top sustained speed of 15 or 16 knots might not do because converted here with additional metal and with age already they will probably just run at 13 or 14 knots and that is slow for a liner. 15 knots locally is still acceptable but 16 knots is better as proven by the Our Lady of Sacred Heart and Our Lady of Medjugorje. But then on the other hand the last time the former Cebu Ferry 2 ran as a liner to Cebu from Manila she was just being made to run at 14 to 15 knots. Does it mean that speed is already acceptable? That will mean a 28 or 29 hour run to Cebu versus the 22 hours of the big liners. But then passing through interports will mask that. Just feed the passengers well. And I always wondered why liners to Cebu don’t pass Roxas City anymore when it is just on the way. Of course the big ones can’t. At least 2GO tried Romblon port with the St. Anthony de Padua (the former Cebu Ferry 2) the last time around. But then maybe small liners shouldn’t be doing the Cebu route.

11576188695_f05c4f7a2f_z

St. Anthony of Padua by Mike Baylon

9250636562_d1ef0c6613_z

St. Ignatius of Loyola by Mike Baylon

It was Aboitiz Transport System which next brought in RORO Cargo ships for conversion into ROPAXes with their Cebu Ferry 2 and Cebu Ferry 3. Originally these two ships were refitted to be overnight ferries but later when they were transferred out of their Cebu base they were refitted again to become liners. The two are known now as St. Anthony of Padua and St. Ignatius of Loyola under 2GO. Aside from the two, there are other RORO Cargo ships which were converted into ROPAXes but they were not liners but overnight ships. Among these are the Graceful Stars and Oroquieta Stars of Roble Shipping.

32435571852_6b63c60cc4_z

The future Trans-Asia (1) by Mike Baylon

I think there are many RORO Cargo ships around that are about 120-130 meters in length that have a design speed of 18 or 19 knots which can still run here at 16.5 to 17.5 knots and they might just be perfect. I don’t know if that is the case of the Warrior Spirit which recently arrived to become the third Trans-Asia (1) of Trans-Asia Shipping Lines. This might be good as a test case. The length of 126.2 meters is perfect and the design speed is 19 knots from twin engines is also perfect. Trans-Asia Shipping Lines has a good record in conversion. But then she will just be an overnight ship but a big one at that. But the coming Panglao Bay 1 of Carlos A. Gothong Lines might not prove to be a test case as she will not be converted to ROPAX, per report.

Panglao Bay 1

Panglao Bay 1 by Mark Ocul

Trying these former RORO Cargo ships for conversion into ROPAXes might be a safe bet. These RORO Cargo ships might be low-risk in acquisition as their purchases might just be above breaker prices. So if it does not make money the worth of metal as scrap might still pay for the acquisition price. In the future Trans-Asia (1) they are even cutting off metal so windows can be made. That is different from the experience of the Cebu Ferries ships were a lot of metal has to be added because decks have to built.

I think it is good time to try acquiring RORO Cargo ships as our future liners. They might turn out to be good bets and worthwhile liners a la Our Lady of Sacred Heart and Our Lady of Medjugorje.

The Sinulog Fluvial Procession, the Ouano House, Piers 8 and 7

One morning I went to the foot of the SRP Road in Cebu to cover the remnant of the Sinulog fluvial procession. I just make do in that area because I will still see most of the participants and besides it is great effort to fight for a good view in the earlier parts of the fluvial procession. Anyway, it is in the vessels that I am more interested in.

OLYMPUS DIGITAL CAMERA

I was just in time. It was still early morning and there was a constant drizzle. But the position of the sun, the early morning and the drizzle made visibility and shots terrible. I have to make do with what is presented by nature. It seems more small crafts participated compared to the last time I covered the fluvial procession but less ferries going to Cebu port were forced to wait near the SRP. The Filipinas Iligan and the Oceanjet 6 were the only prominent ships waiting.

OLYMPUS DIGITAL CAMERA

There were motor bancas which stopped and disgorged the participants in the rocks by the SRP approach and I also covered those. The viewers did not stay long as the drizzle was continuous and there was no sight anymore in that areaexcept for the Coast Guard patrol ships, the Filipinas Butuan plus participant boats which were just idling.

I then decided to make my way to Ouano-House. I called it such because it is there that the E. Ouano house is located. Actually it is more like an office (I have already entered it). And I doubt if it is the ancestral house of the Ouanos because from what I can gather it is also located on reclaimed land like the other facilities in the area.

The jeep driver I rode was kind as he insisted on driving me to the wharf area. I appreciated it since there was a slight precipitation and I did not have to pay for a pedicab. The entry is easy as the guards didn’t mind. I thought it would be like that if the Lite Ferry LCTs to Tubigon have already transferred there. I might look like just one of its passengers.

1342

After the gate, however, it was a different matter. With the never-ending rains and the constant movement of trucks, the surface of the wharf area was already muddy though firm that one’s shoe will not get stuck. I was not surprised. If Ouano can’t maintain the road in the Ouano near the Mercado then they won’t maintain this one either. I thought FastCat would not have to worry for passenger competition to Tubigon. The muck here is already an advertiser for them. Ditto for the rolling cargo or vehicle loading trade.

It was a maze to get inside because the only firm ground with no mud was occupied by the new Litexpress CHA-ROs parked and blocking the pathways. I would go in one direction and pull back because I can’t go on. Finally I had to cross the muddy road where the trucks roll. I ended up in the Star Crafts area but this time it was already too crowded because the future Lite Ferry 17 and Lite Ferry 18 were being refitted there and steel sheets, acetylene tanks, generators and other equipment were occupying the spaces. The only open area is the road going to Star Crafts and it is also muddy.

1363

The Lite Ferry 17 and Lite Ferry 18 are ROPAX LCTs that came from China. Those were former HNSS vessels already phased out. HNSS means Hainan Strait Shipping and that tells where it formerly plied routes. One of them arrived earlier and is already sailing here, the Lite Ferry 16 which looked like a sister ship of them. It looked derelict then like the two now docked in Ouano-House but as always Filipino ship repairers will make them look good again.

Besides them was the new Lite Tug 1. It seems tugs are the vogue now of these competing overnight ferry companies. Roble have theirs already, Asian Marine Transport Corporation (AMTC) also got one, Cokaliong Shipping Lines followed suit and now Lite Shipping also have one too.

1344

Also there were Lite Ferry 26 and Lite Ferry 23. It seems those two were the ones doing the Mandaue-Tubigon route last December altho the latter is not the normal LCT but a catamaran-RORO (a slow one tho). Also there near the SMC Shipping and Lighterage facility was the brand-new Lite Ferry 30. It seems like what they did in the earlier Lite Ferry 27 they were building additional passenger accommodations. It looks like they are sister ships together with the Lite Ferry 29.

I did not stay that long in that wharf. Sometimes it is the rain that makes you decide that. I left after my functional shipspotting and I have to go through the maze again but that was easier than navigating the mud in various parts of that wharf. I really wonder how the passengers make do with such situation. Is the cheapness enough to make them stick? I was able to see the tail end of their way out when one LCT just arrived. I saw no shuttle and here the walk to the jeepney terminus is even longer with less shade.

Sometimes I cannot imagine in this era that such hardship can still be thrown to the passengers. Those LCTs, the wharf and the road were just really designed for trucks. Not passenger-friendly in any way. Maybe the FastCat and Star Crafts are a little more expensive but there is still the Lite Ferry 1 which also does a route to Tubigon. I also wonder. Why don’t the Super Island Express II just come back and maybe hold some off-hour schedule versus the Lite Ferry 1. Pier 1 might even have less expensive connections to the buses and jeeps of Cebu. Sorry not jeeps because that type is so few in Cebu. What I mean are the AUVs, Multicabs and converted Elfs and Canters of Cebu.

1367

From the wharf I made my way to the old Villa Shipping wharf which was just rented from Ouano. I was glad the K-9 guard of Ouano was not there. Their compound was closed and it seems no one is around. Good. I can approach their Elvira-1 and take shots. I wonder why they were too jealous of this old, derelict and bad-looking now former hydrofoil converted into a fastcraft which did not last in service. They should even be glad someone is taking interest. It seems they have a different psychology from us.

1369

There were no more Villa ships there and it seems they have already left as I can see no more ships and facility of them there. What was docked there was the West Ocean 1 of Ocean Transport. I can’t make of the the jumble there. It seems different entities are using that area and not all are connected to shipping.

It was at the far end where I was interested because I want to go near the Lady of Love of Medallion Transport which has not been sailing for some time already. Got some shots but it was not easy as the rain got heavier. Beyond Lady of Love the LCT Poseidon 19 was also docked. Last December this ship was still running the Matnog-Allen route for NN+ATS as a Cargo RORO LCT. Primary Transport Solutions owns this vessel and NN+ATS only charters it.

1382

Again I did not stay long. On the way out I took shots of the old derelict F/C Magallanes, a fastcraft for private use. I was told before it was a Durano gift to Ouano. I did not know enough of Cebu politics and shipping of before to work out how that happened. All I heard was before Durano has shipbuilding and was a Cebu shipping player. In fact one of their derelicts is there in Labogon by the Goldenbridge wharf.

I thought Ernesto Ouano was lucky (except he died prematurely). Well, just to have a big reclaimed area near Cebu, how much is that in legacy worth? Plus their wharves. It is practically a Lite Ferries wharf now but Lite pays them. They are rich just because of the payments for the use of the wharves. But later it seems F.F. Cruz and Lua stole their thunder in Cebu reclamation. And I don’t think they are players in the future Cordova reclamation. But still they are very lucky.

I no longer pushed my ship spotting that day. Too much rain and I am not a farmer. Rain would have been nice in April but the programmer is a little awry. But the next day I came back to the same area but this time my targets were Pier 8 and Pier 7. It was a Sunday and there was no activity there past CDU. I first asked the guard of Ravago/Asian Shipping Corporation. A little canine too but I didn’t mind, didn’t press. Can’t call their GM as all mobile lines of Metro Cebu were down to prevent bombing. I was really more interested to see what was the denouement in the AMTC (Asian Marine Transport Corporation) eviction case nearby.

1687

The AMTC yard was deserted now along with the Dakay Construction yard which was also part of the AMTC lot that was in dispute with F.F. Cruz through the MARRECO entity. MARRECO sought the eviction of AMTC for non-payment and they won in the court. MARRECO then blockaded the facility to prevent AMTC from using it. And AMTC left and transferred to Ouano after a failed bid for the Talisay fishport.

The guards by MARRECO there were suspicious but they told the reason why the Super Shuttle RORO 8 was docked there last December was to take in all AMTC materials left that can still be loaded. But I don’t really know why Super Shuttle RORO 3 and Super Shuttle RORO 2 were also there last December. The two had long been just anchored and not sailing for the best part of 2016.

From there I made my way to the Roble wharf. The left side of that if facing to the sea actually belongs to F.F. Cruz and it is where aggregates carrier LCTs and barges dock. The right side belongs to Roble Shipping. There were three newly-arrived freighters there and I was told two belongs to the scions already. There was also the many docked ships of Roble including the non-running ones. The Ormoc Star was there. She is really ready now for the breakers. On the far end was the fire-hit Wonderful Stars where no work is going on.

1676

It was lonely in that area on a Sunday Sinulog. Almost no people and movement. I caught a jeep going to Mactan and then I walked again the old Mactan bridge. From there I took a Multicab to Muelle Osmena and took the Metro Ferry. The light was dying when I reached Pier 3 and that ended my ship spotting for that day.