The Biggest Shipping Company Based in Mindanao (Part 2)

If the Aleson Shipping Lines was investing in ferries, it was also investing in cargo ships matching what the No. 1 shipping company then of Mindanao, the Sampaguita Shipping Corporation was doing. Maybe there was a need for Aleson Shipping to move and push their own cargo as they are traders and distributors after all. Additionally, in Western Mindanao and the islands (this refers to the Tawi-tawi group, Sulu, Basilan and the associated small islands)  the barter goods trade was strong then, the reason why Zamboanga ships reached as far as Singapore like the cargo ships then of the Aleson Shipping. In those times there was wide leeway for trading in the southern backdoor because then-President Marcos wanted to blow steam from the Muslim rebellion support by letting leading Muslim clans earn from these trading activities. And another reason is that the rice trade of Western Mindanao and the islands is also strong as the region is a rice-deficit area and rice from even outside the country is being in and traded.

The next ship actually acquired by Aleson Shipping Lines after their first ferry Estrella del Mar was the freighter Aleson or Aleson I which supported the commercial activity of Aleson Trading, the business arm of the Tan family which are actually regional distributor of goods. This cargo ship ranged as far as Singapore using the southern backdoor when there was no BIMP-EAGA concept yet.

Along the way, Aleson Shipping Lines acquired other small general-purpose cargo ships before the their acquisition of the Aleson Con Carrier (ACC) series of ships which are mainly containerized (the first cargo ships were not containerized and the company was not yet then in container shipping). Among these early are the Honduras, Honor and Alexander which mainly sailed as trampers and that means they have no fixed routes or schedules. These early freighters of Aleson Shipping are all gone now, disposed when the Aleson Con Carrier series began expanding and the company began to stress container shipping.

Honduras

Honduras. Photo by Mike Baylon of PSSS.

However, the company knew they cannot stand still especially when they have already disposed of some crafts and so they went back to the mode of acquiring a vessel each year using the profit in the operations of the fleet. And so in 2002, they purchased the first Ciara Joie. This vessel is a basic, short-distance ferry-RORO including in the form (single passenger deck, bow ramps) although its length already touched 40 meters at 40.8 meters (there are only a few vessels of this type that reach 40 meters in length). The first Ciara Joie was built by the Kawamoto Zosensho in Higashino, Japan in 1982. This ferry was first known as the Habu Maru No. 15 and she has the permanent ID IMO 8221129. The engine of the ship was small with only 700 horsepower on tap from her single Daihatsu marine engine. This first Ciara Joie was used by the Aleson Shipping in its expansion Bacolod-Iloilo route. Unluckily, she did not live long because in 2003, after only a year of sailing, she became unbalanced while handling cargo and she capsized right in BREDCO port in Bacolod City and was lost.

In 2003, Aleson Shipping Lines decided to join the fastcraft (FC) race and so the company acquired the Sea Jet which is however propelled by screws. This craft was acquired brand-new and she was built by the Far East Shipyard Co. in Sibu, Sarawak, Malaysia. The vessel follows the Malaysian riverboat design and she has a length of 38.7 meters. But then like most Malaysia-built fastcrafts she has no IMO Number. Powered by two Mitsubishi engines of 3,200 horsepower total, this fastcraft has a sustained top speed of 30 knots when new making her a true High Speed Craft (HSC). Later, Sea Jet was brought to Cebu (from Sibu to Cebu, pun intended) when fastcrafts lost favor in Western Mindanao but now she is back in Zamboanga again. This is the only High Speed Craft (HSC) ever purchased by the company and maybe it was good Aleson Shipping did not purchase many fastcrafts as the Malaysian fastcrafts really did not come to be favorites of most of the sailing public.

Sea Jet

Sea Jet. Photo by Albritz Salih of PSSS.

The next year, in 2004, the Aleson Shipping Lines purchased the Kristel Jane 3. This vessel was the former Ferry Izena of the Izena Ferry of Japan. Izena is an island in the Okinawa Prefecture of Japan and this island chain is known for high waves and maybe this is the reason why this ferry has high sides which means the Depth is high. The vessel was built by the Usuki Shipyard Co. in Usuki, Japan in 1983 and she has the permanent ID of IMO 8313489. The Kristel Jane 3 is not that big at 57.3 meters in length which means she is medium-sized for an overnight ferry and she has one-and-a half passenger decks only, a little smaller than most common in our overnight ferries which have two passenger decks. However, she looks tall because of the ship’s high sides. As an overnight ferry equipped with bunks, the passenger capacity is 512 persons which is about the average of her counterparts in Cebu. When still new her maximum speed was rather high at 16 knots because she has a total of 3,240 horsepower from a pair of Niigata engines.

Kristel Jane 3

Photo by Albritz Salih of PSSS

Aleson Shipping Lines did not purchase a ship in 2005 but in 2006 they acquired the Trisha Kerstin 1. In Japan this ferry was known as the Wakashio of the Shodoshima Ferry which serves the Shodo Island in the Inland Sea of Japan. She was built in 1986 by Fujiwara Shipbuilding in Omishima, Japan and she possessed the permanent ID IMO 8608509. This is not a big ship at only 43.8 meters length and only onepassenger deck. She is almost like a basic, short-distance RORO equipped with seats and with the usual single bow ramp that also serves as the ingress and of passengers. Underpowered with only 1,300 horsepower from her single Yanmar engine, her design speed was only at 12.5 knots but that is better than the average basic, short-distance ferry-RORO. Her passenger capacity is rather high at 695 persons (sometimes I take the ratio of the passenger capacity to the engine horsepower and the higher the decimal means it should be more profitable, theoretically, at least on the passenger side).

TK1

Photo by Albritz Salih of PSSS.

In 2007, the company acquired a replacement for the capsized first Ciara Joie and gave her the same exact name which produced confusion to many. This second Ciara Joie is also a basic, short-distance ferry-RORO with the classical design of that type. This ship was built in 1979 which means she was even older than the ferry she replaced (however, she proved to be very sturdy and reliable as she is running well until now). The builder is Imamura Shipbuilding Co. in Kure, Japan and her name in Japan was the Kamagiri No. 3. Her IMO Number is 7824778 and her length is 38.2 meters, among the bigger of basic, short-distance ferry-ROROs. This second Ciara Joie is equipped with a single 900-horsepower Daihatsu engine which gave her a sustained speed of 10 knots (well that is still her top speed). She was used by Aleson Shipping Lines in opening their new Dapitan-Dumaguete route which was a new route then under the Strong Republic Nautical Highway (SRNH) of then-President Gloria Macapagal Arroyo. The route is again a new route for Aleson Shipping not using Zamboanga as a base. This time, however, their off-base route stuck and they are still serving the route (and it even extended to Siquijor later).

CJ

Photo by Mark Edelson Ocul of PSSS.

The next year of 2008, Aleson Shipping Lines acquired another ferry from Japan. This was the former Geiyo of Takehara Namikatakan which became the Trisha Kerstin 2 in the fleet of the company. This ferry was built by Fujiwara Shipbuilding in Omishima, Japan in 1989 and her permanent ID is IMO 8824373. When she was acquired she became the youngest ship in the company by Date Of Build (DOB) with the exception of the the fastcraft Sea Jet which was acquired new. This ferry has two passenger decks and was refitted to be an overnight ferry equipped with bunks. She has a length of 59.5 meters which is almost equal to the Kristel Jane 3. Like the Danica Joy and the Stephanie Marie the ship has box-like structure covering the car deck at the bow area and that is actually an additional protective structure for the ship. The Trisha Kerstin 2 has a top speed of 14.5 knots when new from a two Daihatsu engines developing 3,000 horsepower, combined. The sister ship of the Trisha Kerstin 2  in the country is the Reina de los Angeles of Marina Ferries, the legal-fiction company of Montenegro Shipping Lines, Inc. (MSLI).

tk2

Trisha Kerstin 2 by Mike Baylon of PSSS.

In 2009, Aleson Shipping Lines tried a new type of ship, a Medium Speed Craft (MSC) which resembles a High Speed Craft and so many were fooled at the start thinking she was a fast ferry. This craft was the former Victoria in Japan which became the Anika Gayle 1 in the company. The ferry is small with just a Gross Tonnage of 86 and actually she is slow as she has only one engine and just runs at 12 knots when new. She was acquired by Aleson Shipping as a small day ferry for Basilan passengers with no cars to load and was designed to compete with the successful Bounty Ferry of Evenesser Shipping (which is gone now) which had good seats and like Anika Gayle 1 did not carry cars. This ferry which its unique cropped bow is basically an air-conditioned vessel unlike her competitor which has more Economy seats than Tourist seats. This vessel was built in 1992 and she has no IMO Number. Her sister ships in the country is the Anika Gayle 2 and the Leopards Dos (the former Anstephen). The Anika Gayle 1 has a passenger capacity of 336.

ag1

Anika Gayle 1 by Mike Baylon.

Come the succeeding year, 2010, the former Camellia 2 of Kure Matsuyama Ferry of Japan came to Aleson Shipping Lines. She was actually first acquired by DBP Leasing Corporation, a government corporation that leases ships and she was briefly known as DLC RORO I. In the fleet of Aleson Shipping she became the Trisha Kerstin 3 and she was refitted as an overnight ferry with bunks on two decks. This ferry was built by the Wakamatsu Shipbuilding in Kitakyushu, Japan in 1995 (and so she is much newer than Trisha Kerstin 2) with the IMO Number 9125516. She also has a box-like structure in the bow but in length she is a little short at just 47.9 meters. The power plant of Trisha Kerstin 3  is also a little small with only 2,600 horsepower from two Daihatsu marine engines. However, she has decent speed for her size at 14 knots unlike the Nikel Princely (the Trisha Kerstin 3 was her replacement ship). The Trisha Kerstin 3 has a sister ship in the country, the Reina de Luna of Marina Ferries which was the former Virgen de Penafrancia VII of the Starhorse Shipping Lines (and also as DLC RORO II and VG RORO I before).

tk3

Trisha Kerstin 3 by Mark Edelson Ocul of PSSS.

The particular size of ferries with bunks for 500+ persons in two passenger decks was used by Aleson Shipping Lines in the farther overnight routes to Jolo, Sulu and Bongao, Tawi-tawi. Among these are the Trisha Kerstin 2, Kristel Jane 3, Danica Joy 2, Trisha Kerstin 3 and the Danica Joy (before she was shunted into the Dapitan-Dumaguete route with the arrival of more ferries). With this line-up of five ships of this type (and earlier with the displaced Nikel Princely as reserve ship), Aleson Shipping Lines was now capable of nightly trips to Jolo and Bongao even if the ships don’t sail on their 7th day because one of the five, the Sandakan ship is capable of sailing the 7th day to Jolo. Well, even before this set was completed Aleson Shipping was already able of doing this when their liners were still around. But this time the size of their ships for the overnight routes was just perfect, not to big nor too small.

Meanwhile, on the Basilan front Aleson Shipping Lines also had enough ships already for the two destinations of Isabela City and Lamitan City. The company still had their old Estrella del Mar, the Neveen, the Anika Gayle and the big Stephanie Marie which dominated the rolling cargo to the island (an understatement because at that time there was no other RORO ship to Basilan) and the four was sufficient to fend off all the challengers in this area as being a short route of just about an hour and a half, all can do two round trips in a day.

This development was a watershed for the company. With that and with the earlier collapse of Sampaguita Shipping Corp., the Aleson Shipping Lines began dominating the important Western Mindanao (the context is geographical and not the political subdivision) routes to Basilan, Jolo and Bongao which all represented provincial capitals. All was left to their competition were the secondary routes to Sibutu, Siasi, Olutanga and Margosatubig. Gone already were the routes to Pagadian. Malangas and the “3S” (Sibuco, Sirawai, Siocon towns in Zamboanga del Norte). The first and third lost to the buses and trucks while the second lost to rampant piracy and brigandage (well, its buses and trucks also lost to brigandage and stopped rolling to the town). That is probably the situation why the remaining main competitors of the company, the Magnolia Shipping Corporation and Ever Lines did not grow anymore. And that was probably also the reason why the KST (Kong San Teo) Shipping Lines, the reborn SKT Shipping Corporation collapsed again.

To complete the round-up, Aleson Shipping Lines lost three basic, short-distance ferry-ROROs in their failed Visayas and Luzon expansion, the Alex Craig, the first Ciara Joie and the Kristel Jane 2. They sent ships (one and then two) to the new but successful Dapitan-Dumaguete route (mainly the second Ciara Joie and the Danica Joy). Still they had enough passenger ships to dominate the primary Western Mindanao shipping routes. And to think that at the same time they also have many cargo ships already which I will discuss in “Part 3” of this article. That was how big and great Aleson Shipping Line was way back in 2010. And yet, ironically, they were practically unknown outside Western Mindanao. Now, if anyone was expecting that Aleson Shipping Lines will rest on its laurels, they will be in for a surprise — the acquisitions of this company even accelerated this decade, enough for them to overtake the bigger Cebu overnight ferries. Even me was among those surprised.

lmj3

Photo by Albritz Salih of PSSS.

Not content with this line-up, in 2011 Aleson Shipping Lines acquired the former Daito of Daito Kaiun, a ferry to a small island in the Okinawa chain of islands. This ferry was eventually used initially in the Jolo route after refitting but the difference is this vessel is not a RORO ship but a is cruiser ship with a transom stern (well, actually there is not much rolling cargo to Jolo; a RORO ship is easier to load and unload, however). The Daito became the Lady Mary Joy 3 in the Aleson fleet. She is rather long at 73.0 meters but not being a RORO ship her Beam is smaller. However, she is rather fast at 17 knots when new as she is powered by twin Niigata engines with a total of 4,000 horsepower. This vessel was built by Yamanaka Shipbuilding Co. in Namitaka, Japan in 1990 and she possesses the ID IMO 9006760. She is an overnight ferry-cruiser and to increase her passenger capacity part of the cargo deck was converted into a Tourist accommodations. However, most of her Japan passenger accommodations were retained including the passenger lounge. And for the Economy class, accommodations were built at the stern of the ferry. Now her passenger capacity is about 500 persons.

ag2

Ciara Joie 2 by Albritz Salih.

In 2012, the company bought not one but two small ferries. This was meant to strengthen their Dapitan and Basilan routes as their long routes (Jolo and Bongao) already had enough ferries already by then. One that came to the company was the Ciara Joie 2 which is a sister ship of the second Ciara Joie. In Japan, she was known as the Kamagiri No. 7 indicating she and her sister ship came from same shipping company. On the other hand, the Ciara Joie 2 was built later, in 1982, but by the same shipbuilder and yard (Imamura Shipbuiding Co. in Kure, Japan). In length though she is a little shorter at 36.1 meters and thus her Gross Tonnage and Net Tonnage are smaller. Quizzically, her passenger capacity is much larger than her sister ship at 386 persons. Her engine is a little smaller too at 750 horsepower, not a Daihatsu like the second Ciara Joie but a Niigata. At any rate, they have the same top speed of 10 knots. On the outside the two sister ships look very similar thus she also has the structure of a basic, short-distance ferry-RORO.

AG2 (2)

Anika Gayle 2 by Albritz Salih of PSSS.

What Aleson Shipping Lines purchased in 2012 was actually a pair of sister ships as the other small ship acquired was the Anika Gayle 2, the sister ship of the earlier Anika Gayle 1. One difference of the two is this craft has no chopped bow but she is a true Medium Speed Craft (MSC) with 17 knots maximum sustained speed when still new. The reason for this is she has twin engines and screws compared to the single engine and screw of her sister ship. In Japan, she was known as the Yamabiko. However, this MSC was built earlier than the sister as she was built in 1990. Anika Gayle 2 has a length of just 27.1 meters and the Gross Tonnage is 116. That shows she is a little bigger than Anika Gayle 1 but her passenger capacity is smaller at 235 passengers. Like the Anika Gayle 1, she is basically an air-conditioned vessel. The two both look beautiful and impressive.

LMJ1

Lady Mary Joy 1 by Petersen Lim of PSSS.

In a further expansion mood the company acquired another cruiser in 2013 which was meant to challenge remaining major competitors Magnolia Shipping Corporation and Ever Lines in their remaining stronghold of Siasi. The vessel is the Funakawa Maru which is a converted fishing vessel and thus not a RORO ship but a cruiser. In the Aleson fleet she became the Lady Mary Joy 1, a nomenclature that will bring confusion to some since there was a previous Lady Mary Joy without a number and this usually indicates the first in a series. This vessel was built by the Niigata Shipbuiding & Repair, Inc. in Niigata, Japan in 1994 and she has the IMO Number 9088081. Her Length Over-all is 57.0 meters, about the length of the Aleson ferries to its longer routes of Jolo and Bongao. She is built too as an overnight ferry and she has two passenger decks with a cargo boom at the bow. The Lady Mary Joy 1 has a design speed of 13.5 knots from her single Niigata engine of 1,800 horsepower.

If Aleson Shipping Lines was adding one ferry per year, the year 2014 was again a big acquisition year for them when the company acquired multiple ferries like in 1994 and 1998. In this year Aleson acquired two basic, short-distance ferry-ROROS, the Ciara Joie 3 and the Ciara Joie 5 to further consolidate their Basilan (and especially the Lamitan route which is growing fast) and the routes from Dumaguete which soon extended to Siquijor. Aleson Shipping Lines also acquired the Stephanie Marie 2, a 50-meter class RORO ship. So if anybody will think the Lite Ferries of Cebu is the champion in adding ships in the current decade (Montenegro Lines vacated their title of that last decade when someone left Malacanang), well, there might be a need for a count-off between them and Aleson Shipping Lines. One edge though of the latter is they have plenty of small cargo/container ships.

27867762_2043245236000677_4060062706688564839_n

Photo by Albritz Salih of PSSS.

The Ciara Joie 3 was the former Ferry Yumutsu of the Miyako Ferry KK, an intra-Okinawa ferry company in Japan. She is a basic, short-distance ferry-RORO built in 1995 by the Izutsu Shipyard Co., a small shipbuilder known for building small ships in Nagasaki, Japan. This vessel with the IMO Number 9118862 has a Registered Length (RL) of 33.0 meters with a Beam of 9.5 meters and a Gross Tonnage of 191. One thing I noticed about this craft is its very low DWT (Deadweight Tons) which means she is not really designed for carrying trucks. The Ciara Joie 3 is capable of 10 knots, the normal speed for this type of ferry.

CJ5

Photo by Albritz Salih of PSSS.

Meanwhile, the Ciara Joie 5 was the former Kofuji No. 8 in Japan. She was built by Imamura Shipbuilding Company in Kure, Japan in 1987 with the permanent ship ID IMO 8615734. But although older in Date of Build she looks more modern and impressive (maybe because of her structure that looks muscular and aggressive) than the Ciara Joie 3 (which looks thin and lightweight) and she is slightly bigger with a length is 36.3 meters. One notable metric of the ferry is her Beam of 10.5 inches which is larger than usual for her size and so she looks bigger than she actually is. She is capable of 11 knots from her single Daihatsu marine engine of 1,000 horsepower. The Ciara Joie 5 is a basic, short-distance ferry-RORO with seats for passengers that are mainly original with a few additions at the stern. She does the Basilan route for Aleson Shipping through the port of Lamitan.

31364224_2087189188272948_9202153695821692928_n

Stephanie Marie 2 by Albritz Salih.

The Stephanie Marie 2 is almost like the earlier Stephanie Marie in size and is also refitted as a short-distance ferry with seats. Like her namesake, this ferry also has a Tourist accommodation built on the former lounge of the ship and thus tables and seats like in a lounge are still present. But the better part of the ship consists of Economy sections with seats and one noteworthy data on this ship is the passenger capacity of 1,073 persons and so in the fleet of Aleson Shipping she is now the ferry with the highest passenger capacity (but not the ship with the highest capacity ever because that distinction belongs to the liner Lady Mary Joy 2).  The Stephanie Marie 2 was built as the ferry Otagawa by the Kanda Shipbuiding Co. in Japan in 1986 with the IMO Number 8602062. She first went abroad to South Korea and became the Onbada 1 in 2000. Later, in 2008, she went to Hanil Express Co. (a company that has already sent a few ships in the Philippines) as the Hanil Carferry No. 3.  The Stephanie Marie 2 has a length of 55.9 meters and her permanent ID is IMO 860206. Like the Stephanie Marie, she has a box-like structure at the bow.  Her design speed is 15.5 knots from two Daihatsu marine engines.  And like her namesake she was also fielded in the Basilan route.

KJ5

Photo by Britz Salih of PSSS.

In 2015, Aleson Shipping Lines did not acquire any ferry but to make up for that they purchased two ferries in 2016. These are the Antonia 1 and the Kristel Jane 5 and neither of the two are basic, short-distance ferry-ROROs. The first of the two to be acquired was the Kristel Jane 5 which was first named as the Lady Mary Joy 4 (and maybe she was renamed as “4” is supposed to be “unlucky” in Chinese belief). The Kristel Jane 5 was built by Yamanaka Shipbuilding Co. in Namitaka, Japan in 1998 and she was given the permanent ID IMO 9199505. She was initially known as the Ferry Zamima owned by a city in Okinawa prefecture. This ferry is 61.0 meters in Length Over-all and in refitting a passenger deck with seats was added (visually that made her seem a little short for her actual length) and now she has two passenger decks. The Kristel Jane 5, a short-distance ferry-RORO is a speedy ship for her size at 17 knots top speed and that comes from a pair of Niigata engines with a total of 4,000 horsepower. This vessel has all the modern navigational and safety devices that can be required for a coastal ship of her size.

The other ship purchased by Aleson Shipping Lines in 2016 was the Antonia 1. This was an unusual purchase for the company as this was a former Vehicle Carrier, the first time they purchased such a type of ship (and probably there were only a dozen times we ever purchased a former Vehicle Carrier for conversion into a passenger-cargo RORO ship and that started with the third Don Carlos of Sulpicio Lines in 1977). Vehicle Carriers that are not ocean-going are usually big for regional operations. These are usually tall with high sides but powered with one engine only and that is what Antonia 1 is. This vessel is 103.6 meters in length with a Depth of 11.5 meters which indicates how high her sides is. As such she is now the biggest ferry in the fleet of Aleson Shipping and her declared Gross Tonnage of 3,471 is probably accurate (and that is even higher than the GT of the liner Lady Mary Joy 2). She was acquired by the company to serve their Sandakan route where a big cargo capacity might be needed depending on the political climate (she wouldn’t be oversized if and when unimpeded rice importation is finally allowed). The Antonia 1 started life as the Ariake Maru No. 18 of the Daisan Kaiun KK of Tokyo, Japan. She was built by Honda Shipbuilding Co. in Saiki, Japan. She is powered by a single Akasaka-Mitsubishi engine with 4,000 horsepower and her top speed when new was 15 knots. Of course, she is provided with bunks on the passenger accommodations that were hacked out of a former vehicle deck and metal was chopped from her sides to provide ventilation and viewing decks.

antonia 1

Antonia 1 by Britz Salih.

The Ciara Joie 6 was acquired by Aleson Shipping Lines just two months after the arrival of the Kristel Jane 5 and so actually the company purchased three ships in a period of just three months, another acquisition burst for the company and maybe that is also part of the reason why they did not purchaser any ferry in 2018. The Ciara Joie 6 is another basic, short-distance ferry-RORO, the fifth in the current fleet of the company. This ferry was built by Kawamoto Zosensho in Higashino, Japan in the year 1981 for the Mihara Sea Land Transport as the Kohun Maru (also spelled as Koun Maru) and she carries the permanent ID IMO 8035829. Later, she was owned by the Osaki Kisen Company, Ltd. This ferry is rather fast for a basic, short-distance ferry-RORO as she can do 11.5 knots when new. And the curious thing is her power plant is only a single 900-horsepower marine engine (actually the transmission matters too). And the length of this ferry is a little remarkable as she hit the 40-meter mark at 40.8 meters. Ciara Joie 6 arrived in the country in a little battered state being an old ferry already but Aleson Shipping refurbished her. But like in most short-distance ferry-ROROs the superstructure is no longer changed.

khrayl mangiliman

Photo by Khrayl Mangiliman.

The last ferry acquired by Aleson Shipping Lines was the Ciara Joie 7,  a passenger-cargo LCT (Landing Craft Transport) acquired second-hand from South Korea in 2017, the first time the company acquired a ferry from that country. The vessel has no IMO Number (South Korea as well as China and the Philippines are not too fond of that) but she can be identified through AIS (Automatic Identification System), the transponder of ships. Vessels with AIS are identified by their MMSI Number and Ciara Joie 7‘s Number is 548154500 and so she can be always checked in her assigned Dumaguete-Dapitan route. This Korean-designed LCT was built in a South Korean yard and she was formerly known as the Bo Seong 3 and as the Se Jong No. 3. Korean-designed LCTs usually aren’t flat bottomed and some even have bulbous stems. The dimensions of the vessel is 51 meters by 13 meters in Length x Breadth. The design speed of Ciara Joie 7 was 10.5 knots but she is now struggling in speed with just an average of 7.5 knots currently and so unfortunately she is outgunned by the competition in that department (well, LCTs are outgunned in speed by conventional RORO ships as they are not built for speed).

cj7

Ciara Joie 7 by Albritz Salih.

I can surmise of two reasons why Aleson Shipping Lines has a pause in their acquisition of ferries (and also container ships for that matter). One is they already have enough vessels at of the moment and they are not dispatching their old ferries as those are still reliable. They have a total of 20 ferries as of the moment (April 2019) and unless they expand to other routes they will have no good use for more ferries. And expansion of routes, should they go for it will mean competing out of their Zamboanga base but it might not be in the Damaguete-Dapitan and Dumaguete-Siquijor routes as those routes are already getting saturated (and they have four ships there already). If ever, the company might have now probe for other routes and that has a bearing for the second reason why the company is not expanding at the moment.

The second probable reason is Aleson Shipping Lines now has new competitors in their own turf of Zamboanga,. Montenegro Shipping Lines Inc. (MSLI) “invaded” their home grounds and did the prime Zamboanga-Jolo route. Recently that company from Batangas even added a second ship to the route so it now has a nightly voyage like Aleson Shipping. Aside from Montenegro Lines there is also a new competitor in the route in the form of Theresian Stars (this is a shipping company and not the active ferry with the same name) which fielded the Asian Stars II which was the formerly the Filipinas Surigao and the Sacred Stars in Cebu. It’s impossible that these new ships in the route is not giving pressure or pause to Aleson Shipping and actually the company should take this threat to them seriously. Will Aleson go for a tit-or-tat and expand to other places in the country? Now, that remains to be seen.

 

(To be continued….)

Advertisements

The Third Princess of Negros

29290422264_76fce9925f_z

The first Princess of Negros (Photo credits: the “Commonwealth” and Gorio Belen

Many people when talking of the Princess of Negros which arrived in 1992 think she was the second Princess of Negros after the Princess of Negros which which arrived from Hongkong brand-new in 1962 and which did the Bacolod-Iloilo route. However, there was a prewar Princess of Negros which also arrived brand-new from Hongkong in 1933 which also did the Bacolod-Iloilo route and she was actually the first Princess of Negros and making the Princess of Negros that arrived in 1992 as the third Princess of Negros. Many do not remember now the first Princess of Negros because she was captured by the Japanese military in 1942 during the Pacific War, pressed into their service and was bombed and sank by US warplanes in 1944.

3293619881_ced4a02b73_z

The second Princess of Negros (from the research of Gorio Belen in the National Library)

The third Princess of Negros was much bigger than the first two Princess of Negros ships as she was a RORO liner whereas the first two were short-distance cruisers. When the third Princess of Negros arrived, she became the flagship of Negros Navigation Inc. Her routes then were only to Bacolod and Iloilo from Manila as Negros Navigation then still basically served Western Visayas ports plus the port of Cagayan de Oro.

When the third Princess of Negros arrived in 1992 she joined her sister ship in the Negros Navigation fleet which was the Sta. Florentina which arrived for Negros Navigation much earlier in 1983. The Sta. Florentina was the Okudogo in Japan while the third Princess of Negros was the Okudogo No. 2. Their Japan owners was the Kurushima Dock. No, the sister ships were not built in Shin Kurushima Dockyard. Before, a shipyard in Japan can also operate ferries as a prop to the shipping industry.

8240896408_4327e28c95_z

From the research of Gorio Belen in the National Library

The sister ships were actually built by Shin Kochi Jyuko Company in Kochi, Japan. Okudogo No. 2, the latter Princess of Negros was completed in July of 1973 and given the ID IMO 7323310. She was a RORO ferry with the dimensions 118.9 meters by 20.6 meters with a gross register tonnage (GRT) of 4,700 as built. Her load capacity was 1,664 in deadweight tons (DWT). This RORO had bow and stern ramps as access and the visor bow ramps continued to be operational here when most RORO liners had those welded shut.

The ship had a raked stem and a transom stern. She had two masts, a single center funnel and later full scantling unlike her sister ship Sta. Florentina. The time she was fielded was already the peak of ship passenger demand and big passenger capacities were needed. The ship had three full decks dedicated to the passenger accommodations (but not at the start) and her passenger capacity across six classes was 1,499 persons. Later, this even rose to 2,002 persons when full scantling were built on the ship.

M/S Princess of Negros Folio

Creation by Irvine Kinea

A significant portion of her accommodations was dedicated to ever-so-on-demand Economy section which occupied the sterns of the three passenger decks. The higher classes as well as the restaurants were on the forward sections of that. The bridge deck of the ship was exclusive for navigation and for the accommodation of the crew.

The third Princess of Negros had a single car deck that had about 400 lane-meters. She carried TEU and XEU container vans both mounted on chassis and not and also a few vehicles. Her actual declared capacity was 100 TEU. In the Philippines the third Princess of Negros had only 4,494 in gross tonnage (GT) and 1,291 in net tonnage (NT), a violation of the IMO rule that the net tonnage of a ship cannot be less than 1/3 of its gross tonnage. It is certainly an underestimation given she has full scantling. Her sister ship Sta. Florentina had 1,518 in net tonnage and it had no full scantling.

Princess of Negros

Photo Credit: Edison Sy

The design top speed of the Okudogo No. 2 was 18.5 knots and that comes from 4 Fuji 8M32CH4C engines that develops 10,400 horsepower which is the same powerplant of her sister ship. In the Philippines as the Princess of Negros she usually cruised at 17 knots which was good for a 20-hour transit time to Bacolod or Iloilo. In 1994 she was displaced as the flagship by the beautiful and sleek St. Francis of Assisi but she continued doing the Bacolod and Iloilo routes.

When Negros Navigation began its big expansion program starting in 1995 when Negros Navigation acquired six more bigger and faster liners in a span of just over two years, Princess of Negros no longer did the exclusive Bacolod and Iloilo routes. First, she was sent to the long Cagayan de Oro route in pair with the Sta. Ana. A little later, she was already doing the Roxas City route and in that time she was the best ship in that route.

24765781545_d4ba612f60_z

Photo credit: Ray Smith

With the entry of the new millennium, the over-expansion of Negros Navigation bit hard and the company was hit by illiquidity and shipyards and suppliers filed suits of garnishment. After that, the ships of Negros Navigation were barely sailing. They did not sink completely, however, as a white knight in the person of Manny V. Pangilinan appeared. However, in the restructuring, routes were cut and many of the RORO liners of Negros Navigation were offered for sale.

During that time there was already a crisis in the liner sector as the passengers had already began drifting to the intermodal buses and budget airlines. Panay island liners were hit hard when the Roxas, Oriental Mindoro to Caticlan, Malay, Aklan route opened in late 2003. Very soon, intermodal trucks and buses began rolling to Panay island and immediately most hit were the ports and ships going to northern and western Panay island ports.

24739562666_2f06625067_z

Photo credit: Ray Smith

The third Princess of Negros was laid up in Manila and for about two years she was appearing in ship-for-sale sites. There were no takers, however, and on 2007 she sailed to Bangladesh when she was bought by Chittagong breakers. She was eventually broken up on April 6, 2007 when she was still a good and reliable ship.

She served just a little over a decade in the Philippines.

The Pioneering But Hard-Luck Cardinal Shipping

This article could be considered a tribute to Cardinal Shipping Corporation because among all shipping companies I consider them the true pioneers of island connections using short-distance ferry-ROROs (to distinguish it to the earlier LCTs). This is also an attempt to set the record straight because some government functionaries who have no knowledge in shipping repeat and repeat that the government-owned Maharlika ships first connected Luzon, Visayas and Mindanao through short-distance ferry-ROROs when that is simply not true and factually incorrect. Personally, I hate historical revisionism in any form and that is actually what these dumb government functionaries are actually doing and then some clueless young members of media take after what they say. If this is not checked, we will see a kind of Goebbels syndrome in shipping.

As they say, research and documentation are the most important things in making claims or in debunking claims and the Philippine Ship Spotters Society (PSSS) was fortunate a co-founder, Gorio Belen, took time to research in the National Library and found the proofs needed to back up what we oldtimers knew that there were ferries that antedated the government-owned Maharlika ships and sometimes one good proof are newspaper advertisements and photos of their ship docked in Allen port. Well, maybe another good proof would come from some retired bus drivers that loaded their ships aboard Cardinal Ferry 1 and those were mainly Pantranco South bus drivers. I myself is a secondhand source because some of these drivers bought merchandise from us to be sold in Calbayog and Catarman. Of course, another good source will be the Allen and Matnog LGUs (local government units). They will know, definitely, especially some of their retired local politicians and local government employees. Add to that also some retired or still active porters.

Cardinal Shipping Corporation actually started in cargo shipping with the Cardinal V. This is a small cargo ship built in 1968 that was formerly the Ryusho Maru in Japan and that ship engaged in tramper shipping. In 1979, Cardinal Shipping branched out into RORO shipping when they brought out the Cardinal Ferry 1 to do a Matnog-Allen RORO route to the consternation of the wooden motor boats doing the route like the MB Samar and MB Sorsogon of Eugenia Tabinas (later of Bicolandia Shipping Lines). The ports they were using were not yet the modern Matnog Ferry Terminal but the old municipal port of Matnog and in Allen, they used the old BALWHARTECO wharf. Both are no longer existing. The two ports were just near the Matnog Ferry Terminal and the present port of BALWHARTECO.

Cardinal Ferry 1 was one of the many Tamataka Marus that came to the Philippines and one of the earliest. She was Tamataka Maru No. 21 and she was acquired from Shikoku Ferry of Japan. The other Tamataka Marus in the Philippines are the Reina Emperatriz (Tamataka Maru No. 71), Reina Genoveva (Tamataka Maru No. 75), Reina Hosanna (Tamataka Maru No.78), all of Montenegro Shipping Lines Inc. and Marina Ferries, Queen Helen of Arrel Traders (Tamataka Maru No. 31), Golden Arrow of Arrow Shipping (Tamataka Maru No. 51), Viva Penafrancia of Viva Shipping Lines (Tamataka Maru No. 52) and the Dona Isabel of SKT Shipping (Tamataka Maru No. 32).

Cardinal Ferry 1 was a RORO ship built by Sanuki Shipbuilding & Iron Works in Sanuki yard, Japan in 1964. She was just a basic, short-distance ferry-RORO at 39.2 meters by 9.1 meters with a gross register tonnage (GRT) of 355 tons. Cardinal Ferry 1 had a passenger capacity of 400 persons in sitting accommodations and she was powered by a single Niigata diesel engine that gave her a top speed of 10 knots when new. She possessed the ID IMO 7743118.

In 1980, Cardinal Shipping fielded the Cardinal Ferry 2 to sail the Surigao-Liloan-Maasin route. There was no Lipata Ferry Terminal then yet and they used what is known now as the Verano port now in Surigao City. In Liloan, they used the Liloan municipal port as there was no Liloan Ferry Terminal yet. Liloan, Surigao and Maasin were better ports than Allen and Matnog infra-wise as both hosted overnight ships to Cebu. With the fielding of Cardinal Ferry 2, for the first time ever Luzon, Visayas and Mindanao were connected and a vehicle can roll from any part of Luzon to Mindanao and vice-versa. This was the fulfillment of the dreams of many including the late President Diosdado Macapagal in whose administration the JICA-backed Pan-Philippine Highway project (later renamed as Philippine-Japan Friendship Highway because Japan will partly fund the mega-project and war reparations to be paid by Japan will be used in it) first took shape. During Martial Law, this morphed into the Maharlika Highway. However, the government’s version of connection happened only in 1984 with the coming of Maharlika II and that was 4 years after Cardinal Shipping did it.

Cardinal Ferry 2 was the former Shikishima Maru No. 1 in Japan and she was built by Imabari Shipbuilding Company Ltd. in Imabari shipyard, Japan in 1960 (therefore she was older than Cardinal Ferry I) and she possessed the ID IMO 5322867. She was bigger than Cardinal Ferry 1 at 50.1 meters length by 7.8 meters breadth by 3.9 meters depth. The ship has 491 tons in Gross Register Tonnage (GRT), 302 tons in Net Register Tonnage (NRT) and 800 tons in Deadweight Tonnage (DWT). This ferry was powered by a single Makita engine of 640 horsepower and the top speed was 9.5 knots.

The next year, in 1981, Cardinal Shipping laid out the Cardinal Ferry III which was the former Sanyomarugame Maru No.1 of Sanyo Kisen in Japan. She was fielded in the pioneering RORO route of San Jose de Buenavista, Antique to Puerto Princesa, Palawan! [I really wonder until now what sense this made. Maybe a Cebu-Bohol or a Cebu-Leyte connection would have more sense.] This ferry was built by Kanda Shipbuilding Company in Kure yard, Japan in 1965. Her dimensions are 44.5 meters length by 10.0 meters breadth by 2.9 meters depth. Her original Gross Register Tonnage (GRT) was 495 tons with a Deadweight Tonnage (DWT) of 190 tons. The passenger capacity was 350 and she had twin Niigata engines of a total 1,700 horsepower. The ship’s top speed was 13.5 knots which is fast for a small RORO then. The ship’s ID is IMO 6607848.

In the same year of 1981, Cardinal Shipping acquired the former Taysan of Seaways Shipping Corporation which was an old cargo ship built way back in 1956 by Sanoyas Shipbuilding Corporation in Osaka yard, Japan. This became the Cardinal VI in the Cardinal Shipping fleet and like the Cardinal V she engaged in tramper shipping.

The last ferry and ship acquisition of Cardinal Shipping was the Cardinal Ferry Seven in 1982. She was the former Azuki Maru in Japan of Kansai Kyuko. This RORO ship was built in 1964 by Hashihama Zosen in Hashihama yard, Japan. She measured 41.7 meters length by 12.6 meters breadth by 3.6 meters depth. The original Gross Register Tonnage was 473 tons with a Deadweight Tonnage (DWT) of 165 tons . Her passenger capacity was 650 persons (that is a little big!). The ship was powered by two Daihatsu engines of 1,100 horsepower and the top speed was 12.5 knots. The ship’s ID was IMO 6502191.

Although pioneering, Cardinal Shipping was not successful for long. Even before the  Maharlika I arrived in Matnog-San Isidro route in 1982 and the Maharlika II in Lipata-Liloan route in 1984, she was already under pressure. There were already other competitors that came in the two routes especially in Matnog-Allen route like the Northern Star and Laoang Bay of Newport Shipping (before this Newport Shipping has already been sailing a route from Manila to Samar). Eugenia Tabinas also got into ROROs when she was able to acquire the Eugenia from Esteban Lul of the Visayas. Later, she was able to acquire the Northern Star from Newport Shipping which became the Northern Samar after conversion in Cebu.

It was really hard to compete against the new Maharlika ships which did not need to show a profit as it was government-owned (that is how government always worked and the usual hackneyed reasoning is it is “public service”. However, there was no denying that the Maharlika ships were better as it was much newer. Cardinal Shipping also had ships that were not only old but built in the 1960’s when engines were still not that long-lasting as microfinishing was not yet in great use and metallurgical research was not yet that advanced. Their route to Palawan also did not make sense in that period. In San Bernardino Strait, they soon had a dogfight in their hands with many entrants. Not long after, the ships of Cardinal Shipping began losing to competition.

Cardinal Shipping did not completely go away however and it had a rebirth in the form of Cardinal Philippine Carrier which was based in Iloilo City. They were able to retain the former Cardinal Ferry 3 which was now known as Palawan Traders. Before this she was known as the Kanlaon Ferry, a name maybe given so she will stick in her revised route. They then added a pioneering ferry, a catamaran High Speed Craft, the Bacolod Express in 1989 to do the Bacolod-Iloilo route. This was very notable because before her only Manila had High Speed Crafts in the early 1970s. Some of those were even hydrofoils and they were used in a route to Corregidor which was being heavily promoted then as a tourist destination. 

The Bacolod Express was the former Quicksilver I and she was built by NQEA Australia in Cairns, Australia in 1986. She arrived in the country in 1989 and she was formerly known as the Princess of Boracay and in 1990, she became the Bacolod Express. This aluminum-hulled catamaran measured 29.0 meters length by 11.0 meters breadth by 3.2 meters depth and with a gross tonnage of 318 and a net tonnage of 105. She had a passenger capacity of 356 and she was powered by two MWM engines of 2,700 horsepower which gave the High Speed Craft a top speed of 27 knots. This ferry was one beautiful catamaran.

Bacolod Express was successful in her route for a few years. The first sign of trouble came when BREDCO, the incomplete reclamation area then but her port in Bacolod suddenly began refusing her docking. She cannot dock in Banago port because that was controlled then by Negros Navigation Company, a competitor of theirs which operated conventional ferries between Iloilo and Bacolod, the Don Vicente and the Princess of Panay. Definitely, Bacolod Express was taking traffic away from NENACO which had no equivalent at the start to Bacolod Express (they later fielded the St. Michael). Everybody knows NENACO’s board were powers magnificent then in Western Visayas and could make things happen (or not happen).

Not long after, Bacolod Express also began experiencing engine troubles (in less than 10 years of operational life?) thus unreliability plagued her. That was deadly when new competitors came into her route. With Bacolod Express no longer able to carry the flag, Cardinal Philippine Carrier soon quit the business. They sold the Palawan Traders to E.B. Aznar Shipping where she became the Melrivic Seven. Today this ship still sails the Tanon Strait crossing between Escalante and Tabuelan where she once sailed before. She is the only remnant left and living reminder that once there was Cardinal Shipping but many people do not know that. Maybe not even her crew.

That was the sad tale of Cardinal Shipping which was pioneering in very many ways but which lost in the end. I doubt if many still remember them.

cardinal-shipping

Photo Credits: Gorio Belen, Times Journal and Philippine Daily Express